Band and Orchestra Risers

Portable seated riser sets enhance onstage performances and help facilitate instruction in the practice room. Guardrails are furnished for the uppermost level of the riser set.

For more information please email info@midwestfolding.com or call 800-621-4716.

Carry over 200 pounds per square foot when uniformly loaded
Integral couplings allow stages to be joined together
Heavy Duty Construction:
Stage and riser decks are constructed with solid plywood, laminated with tempered hardboard on top and bottom. Decks are surrounded and supported by 16" gauge formed steel channels for maximum carrying capacity

Couplings:
Stage units are equipped with integral couplings that may be selectively engaged as needed to join platforms of the sameheight or platforms that are 8” different in height. Coupling devices are permanently attached.

36" Wide
Adjustable

Deck Style	Model No.	Size W x L x H	Wt. Lbs
Hardboard Deck	TA3416H	3' x 4' x 16" or 24"	68
	TA3424H*	3' x 4' x 24" or 32"	79
	TA3616H	3' x 6' x 16" or 24"	97
	TA3624H*	3' x 6' x 24" or 32"	101
	TA3816H	3' x 8' x 16" or 24"	118
	TA3824H	3' x 8' x 24" or 32"	122
	TA3832H*	3' x 8' x 32" or 40"	125
Polypropylene Deck	TA3416P	3' x 4' x 16" or 24"	67
	TA3424P*	3' x 4' x 24" or 32"	78
	TA3616P	3' x 6' x 16" or 24"	96
	TA3624P*	3' x 6' x 24" or 32"	99
	TA3816P	3' x 8' x 16" or 24"	116
	TA3824P	3' x 8' x 24" or 32"	120
	TA3832P*	3' x 8' x 32" or 40"	123
Carpet Deck	TA3416C	3' x 4' x 16" or 24"	64
	TA3424C*	3' x 4' x 24" or 32"	74
	TA3616C	3' x 6' x 16" or 24"	92
	TA3624C*	3' x 6' x 24" or 32"	96
	TA3816C	3' x 8' x 16" or 24"	111
	TA3824C	3' x 8' x 24" or 32"	115
	TA3832C*	3' x 8' x 32" or 40"	118

* Legs overlap when folded for storage - this reduces storage capacity by two to four units per caddy.
SAFETY NOTICE: Guard rails should be used on sides and rear.

48" Wide
Adjustable

Deck Style	Model No.	Size W x L x H	Wt. Lbs
Hardboard Deck	TA4416H	4' x 4' x 16" or 24"	92
	TA4424H*	4' x 4' x 24" or 32"	112
	TA4616H	4' x 6' x 16" or 24"	133
	TA4624H*	4' x 6' x 24" or 32"	161
	TA4816H	4' x 8' x 16" or 24"	159
	TA4824H	4' x 8' x 24" or 32"	165
	TA4832H*	4' x 8' x 32" or 40"	170
Polypropylene Deck	TA4416P	4' x 4' x 16" or 24"	91
	TA4424P*	4' x 4' x 24" or 32"	111
	TA4616P	4' x 6' x 16" or 24"	130
	TA4624P*	4' x 6' x 24" or 32"	158
	TA4816P	4' x 8' x 16" or 24"	156
	TA4824P	4' x 8' x 24" or 32"	161
	TA4832P*	4' x 8' x 32" or 40"	167
Carpet Deck	TA4416C	4' x 4' x 16" or 24"	87
	TA4424C*	4' x 4' x 24" or 32"	106
	TA4616C	4' x 6' x 16" or 24"	126
	TA4624C*	4' x 6' x 24" or 32"	154
	TA4816C	4' x 8' x 16" or 24"	150
	TA4824C	4' x 8' x 24" or 32"	155
	TA4832C*	4' x 8' x 32" or 40"	160

* Legs overlap when folded for storage - this reduces storage capacity by two to four units per caddy.
SAFETY NOTICE: Guard rails should be used on sides and rear.

36" Wide
Fixed

Deck Style	Model No.	Size W x L x H	Wt. Lbs
Hardboard Deck	TF3408H	36" x 48" x 8"	57
	TF3416H	36" x 48" x 16"	65
	TF3424H*	36" x 48" x 24"	68
	TF3608H	36" x 72" x 8"	82
	TF3616H	36" x 72" x 16"	93
	TF3624H*	36" x 72" x 24"	97
	TF3808H	36" x 96" x 8"	103
	TF3816H	36" x 96" x 16"	114
	TF3824H	36" x 96" x 24"	118
	TF3832H	36" x 96" x 32"	122
	TF3840H*	36" x 96" x 40"	125
Polypropylene Deck	TF3408P	36" x 48" x 8"	56
	TF3416P	36" x 48" x 16"	64
	TF3424P*	36" x 48" x 24"	67
	TF3608P	36" x 72" x 8"	80
	TF3616P	36" x 72" x 16"	91
	TF3624P*	36" x 72" x 24"	96
	TF3808P	36" x 96" x 8"	100
	TF3816P	36" x 96" x 16"	112
	TF3824P	36" x 96" x 24"	116
	TF3832P	36" x 96" x 32"	120
	TF3840P*	36" x 96" x 40"	123
Carpet Deck	TF3408C	36" x 48" x 8"	54
	TF3416C	36" x 48" x 16"	61
	TF3424C*	36" x 48" x 24"	64
	TF3608C	36" x 72" x 8"	77
	TF3616C	36" x 72" x 16"	88
	TF3624C*	36" x 72" x 24"	92
	TF3808C	36" x 96" x 8"	96
	TF3816C	36" x 96" x 16"	107
	TF3824C	36" x 96" x 24"	110
	TF3832C	36" x 96" x 32"	115
	TF3840C*	36" x 96" x 40"	118

* Legs overlap when folded for storage - this reduces storage capacity by two to four units per caddy.
SAFETY NOTICE: Guard rails should be used on sides and rear.

48" Wide
Fixed

Deck Style	Model No.	Size W x L x H	Wt. Lbs
Hardboard Deck	TF4408H	48" x 48" x 8"	72
	TF4416H	48" x 48" x 16"	86
	TF4424H*	48" x 48" x 24"	92
	TF4608H	48" x 72" x 8"	105
	TF4616H	48" x 72" x 16"	125
	TF4624H*	48" x 72" x 24"	133
	TF4808H	48" x 96" x 8"	132
	TF4816H	48" x 96" x 16"	152
	TF4824H	48" x 96" x 24"	159
	TF4832H	48" x 96" x 32"	165
	TF4840H*	48" x 96" x 40"	170
Polypropylene Deck	TF4408P	48" x 48" x 8"	71
	TF4416P	48" x 48" x 16"	84
	TF4424P*	48" x 48" x 24"	91
	TF4608P	48" x 72" x 8"	102
	TF4616P	48" x 72" x 16"	123
	TF4624P*	48" x 72" x 24"	130
	TF4808P	48" x 96" x 8"	129
	TF4816P	48" x 96" x 16"	149
	TF4824P	48" x 96" x 24"	156
	TF4832P	48" x 96" x 32"	161
	TF4840P*	48" x 96" x 40"	167
Carpet Deck	TF4408C	48" x 48" x 8"	68
	TF4416C	48" x 48" x 16"	81
	TF4424C*	48" x 48" x 24"	87
	TF4608C	48" x 72" x 8"	98
	TF4616C	48" x 72" x 16"	118
	TF4624C*	48" x 72" x 24"	126
	TF4808C	48" x 96" x 8"	123
	TF4816C	48" x 96" x 16"	143
	TF4824C	48" x 96" x 24"	150
	TF4832C*	48" x 96" x 32"	155
	TF4840C*	48" x 96" x 40"	160

* Legs overlap when folded for storage - this reduces storage capacity by two to four units per caddy.
SAFETY NOTICE: Guard rails should be used on sides and rear.

Rectangle Arrangement

Style	Model No.	Quantity
Fixed Height	TF4808	3
	TF4816	3
	TF4824	3
	TF4832	3
	TGRU48	14
	Capacity: 48
Combination Fixed & Adjustable Height	TF4808	3
	TA4816	6
	TF4832	3
	TGRU48	14
	Capacity: 48

Deck Finishes

Carpet

Hardboard

Black Polypropylene

Grey Polypropylene

Carpet Colors

Charcoal Grey

Ebony Black

Pewter Grey

Skirting Colors

Burgundy

Jade

Navy

Black

Skirting

	Model No.	Size H"	Wt. Lbs
Transfold Box Pleat Includes one skirt clip per linear foot of skirting	TSKB08	7"	0.2
	TSKB16	15"	0.2
	TSKB24	23"	0.3
	TSKB32	31"	0.3
	TSKB40	39"	0.4
Transfold Shirred Pleat Includes one skirt clip per linear foot of skirting	TSKS08	7"	0.1
	TSKS16	15"	0.1
	TSKS24	23"	0.1
	TSKS32	31"	0.2
	TSKS40	39"	0.3

Skirt Clip

	Model No.	Order Information
Replacement Clip For Transfold only	TSKC	1 clip recommended per linear foot of skirting

This warranty is extended for the period of time after the date of purchase by the original purchaser and is extended only to the original purchaser of the product and may be enforced only by such purchaser. This warranty is not transferable and expires if the product is resold or otherwise transferred. This warranty does not apply to any product which has been altered by anyone other than an MFP representative or has been damaged due to accident, abuse, misuse, misapplication, modification, alteration or improper installation, set-up, care, maintenance or repair. MFP does not warrant any products, components or parts which are not manufactured by MFP. MFP will, at its option, repair or replace, free of charge, the product covered by this warranty, or a portion of the product, that is found to be defective in material or workmanship during the warranty period. To make a claim under this warranty, the original purchaser shall provide proof of the date of purchase and notice of the alleged defect to:

Midwest Folding Products
Customer Service Department
4726 W. 147th Street
Midlothian, IL 60445

Any repair or replacement under this warranty shall not extend the warranty period. The foregoing shall constitute the exclusive remedy of the purchaser and the exclusive liability of MFP. The above warranty is exclusive and in lieu of all other express warranties whether oral or written, expressed or implied. No warranty of merchantability or fitness for a particular purpose shall apply. MFP shall not, under any circumstances or under any legal theory, be liable to the purchaser or any other person for special, incidental or consequential damages of any nature including without limitation damages to, or loss of use of property, damages for loss of profits or revenues or any other damages arising from the original purchase. MFP’s liability will in no event exceed the purchase price of the product. No agent, employee or representative of MFP nor any dealer or other person is authorized to modify this warranty in any respect. The infelicity of all or a part of any of the provisions of the Limited Warranty shall not affect or invalidate any other provision of this Limited Warranty.

Steps are 12" deep and 34" wide
Slip resistant, grey polypropylene surfaces
Units include two handrails
Steps clamp securely to the stage perimeter
Two, three and four step models include wheels

TST1

TST2

TST3

TST4

Preparing the Platform

Step 1: Unfold Unit
Unfold the legs, making certain that the leg braces are fully opened.

Step 2: Adjust Legs
Adjust each leg to the correct height by removing the clevis pin, loosen the thumbscrew one turn, and slide the insert to the desired position.

Step 3: Insert the Pin
Insert the clevis pin through the receiver tube and leg insert and tighten the thumb screws with moderate force.

Step 4: Extend Coupling
Extend couplings needed to join platforms at the same level by loosening the thumbnut, rotating the coupling so that it extends beyond the frame of the platform and tightening the thumbnut, making sure that the locking tab is properly engaged.

Step 5: Multilevel Riser Set
If constructing a multilevel riser set, rotate the coupling hooks so that they project from each leg.

Unloading Platform

Step 1: Gravity Operated Lock
Rotate the gravity operated lock located at the top of the caddie and hold it open so that the platform will clear the lock.

Step 2: Important!
After the platform passes under the lock, allow the lock to rotate downward to secure the remaining stages.

Step 3: Tilt and Balance
Tilt the top of the platform toward you until the wheels contact the floor and the platform is comfortably balanced in your hands.

Assembling a Stage Set

Step 1: Roll Platform
Roll each platform into position starting with the left side of the back row and building toward the right.

Step 2: Coupling Hooks
As platforms are added, roll each one into exact positions and lower slowly to the floor, allowing the coupling hooks to engage with the frames of the preceding platforms.

Assembling a Riser Set

Step 1: Tallest First
Start with the tallest platforms at the rear by following step 1 - Assembling a Stage Set.

Step 2: Lower level to Taller
Couple lower level platforms to taller platforms by lifting the frames of the lower platforms over the coupling hooks located on the legs of the taller platforms and the couplings of the platforms at the same level.

Installing Guard Rails

Step 1: Important!
Guard rails should be used at the back and sides of all stages whenever possible. Risers should be assembled with chair stops or guard rails at the tallest level.

Step 2: Clamp
Slide the guard rail clamp over the edge of the platform at the desired location and tighten the bolts on each clamp.

Step 3: Stabilize
Extend the stabilizer inserts by releasing the spring button, sliding the stabilizer until it reaches the floor and engaging the spring button in the corresponding hole.

Step 4: Adjust
Adjust the leveling glide until the glide is in firm contact with the floor.

Loading Platforms

Step 1: Platform Position
Roll (if adjustable legs) the platform toward the caddie, taking care to center platform with the caddie.

Step 2: Tilt Platform
When the platform contacts the vertical support of the caddie or a previously loaded platform, tilt the platform up to the vertical position.

Step 3: Important!
After the platform passes under the lock make sure that the lock rotates downward to secure the stages.

Step 4: Adjust
Adjust the leg inserts on one or more leg assemblies to their lower position and then fold all legs by pushing in on the center of the leg braces.